| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Suspension | Section: Tire Pressure Monitoring | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002AS900AX |
| Title: TIRE / WHEEL: TIRE AND WHEEL SYSTEM: INSPECTION (2008 Sequoia) | ||
INSPECTION
1. INSPECT TIRE
(a) Check the tires for wear and proper inflation pressure.
Standard Cold Tire Inflation Pressure:
|
Tire Size |
Front kPa (kgf/cm2, psi) |
Rear kPa (kgf/cm2, psi) |
|---|---|---|
|
P275/65R18 |
230 (2.3, 33) |
230 (2.3, 33) |
|
P275/55R20 |
210 (2.1, 30) |
230 (2.3, 33) |
|
(b) Using a dial indicator, check the tire runout. Tire runout: 3.0 mm (0.118 in.) or less |
2. ROTATE TIRE
HINT:
Rotate the tires as shown in the illustration.
3. INSPECT WHEEL BALANCE
|
(a) Check and adjust the off-the-car balance. |
(b) If necessary, check and adjust the on-the-car balance.
Standard imbalance after adjustment:
8 g (0.0180 lb) or less
NOTICE:
-
Using a cleaning detergent, remove dirt, oil and water from the areas shown in the illustration (approximately 25 mm (0.993 in.)).
- Do not touch the adhesive part of the balance weight.
- Adhere the balance weight to the areas shown in the illustration.
- Push the balance weight securely with your fingers to attach it.
- Do not reuse the balance weight.
4. INSPECT FRONT AXLE HUB
5. INSPECT REAR AXLE HUB
|
|